Chemoform

The Chemoform pH-Minus Granules are an effective pH regulator for lowering an excessively high pH value in pool and hot tub water. They ensure that the water remains within the optimal range and create the basis for effective disinfection and clear, pleasant bathing water. Properties ✔ Granules for lowering the pH value ✔ Fast and residue-free dissolving ✔ Suitable for pools, hot tubs and swimming pools ✔ Prevents limescale deposits and incrustations ✔ Supports the optimal effect of disinfectants An excessively high pH value often leads to cloudy water, limescale deposits, and reduced disinfection performance. The product brings the value back to the ideal range of approx. 7.0 – 7.4. Effect & Benefits By targeted lowering of the pH value: the effectiveness of chlorine or active oxygen improves limescale deposits are prevented the water remains clear and hygienic skin and eye irritations are reduced Application & Dosage Dosage: approx. 150 g per 10 m³ water lowers the pH value by about 0.2 Always pre-dissolve granules in a bucket of water Add solution evenly to the water with the circulation running Apply in several small steps with intermediate measurement 💡 Note: The required amount depends on the water hardness – hard water requires more product. Advantages at a Glance Sustainably stabilizes water quality Protects pool equipment from limescale and deposits Improves disinfection performance Simple and safe application For consistently clear, well-maintained water Notes Check pH value regularly (1–2 times per week) Do not apply product directly to sensitive materials Do not mix with other chemicals Conclusion The Chemoform pH-Minus Granules are an indispensable basic product for pool care. They ensure the correct water balance, protect equipment and surfaces, and enable effective disinfection – for clean, clear and pleasant water. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform Algen Ex liquid is a highly effective, chlorine-free algaecide for preventing and combating algae in pool and whirlpool water. It reliably ensures clear, hygienic water and sustainably prevents the re-formation of algae. Properties ✔ Liquid algaecide for algae prevention ✔ Chlorine-free, pH-neutral and odorless ✔ Low-foaming – also ideal for whirlpools ✔ Can be combined with all common water care products ✔ Suitable for pools, swimming pools and spas The product is particularly user-friendly and does not affect water quality or bathing comfort. Effect & Benefits Chemoform Algen Ex specifically targets: Algae formation Slime formation on walls and pipes Organic impurities It reliably prevents algae growth and supports disinfection, but does not replace chlorine or oxygen treatment; rather, it complements them optimally. Application & Dosage Initial dosage: approx. 100 ml per 10 m³ water Redosing: every 14 days, 100 ml per 10 m³ For algae infestation (shock treatment): approx. 250 ml per 10 m³ Always dilute the product beforehand and add it evenly along the pool edge into the water. 💡 Tip: Ideal pH value for optimal effect is 7.0 – 7.6. Notes Does not replace disinfection – use chlorine or active oxygen in addition Increase dosage in case of high load (heat, rain, many bathers) Use biocidal product with caution (signal word: Danger) Conclusion The Chemoform Algen Ex liquid is an indispensable product for preventive pool care. It effectively protects against algae growth, improves water quality, and ensures consistently clear and well-maintained pool water – ideal in combination with your regular disinfection. Signal word: DANGER Use biocidal products with caution. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety precautions P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container according to local / regional / national / international regulations.

Read more less

Chemoform CH-Granulate are inorganic chlorine granules with a high active chlorine content (approx. 68–70%) used for the fast and reliable disinfection of pool or hot tub water. They are suitable for shock chlorination during heavy loads as well as for regular continuous chlorination for hygiene and water treatment. Properties Inorganic chlorine granules with approx. 68–70% active chlorine – ensures strong disinfection. Quickly soluble without residue – easy application without residue in the water. Ideal for all types of pools and spas, especially with soft water. Slightly pH-increasing, therefore check pH value before adding. Effect & Application Chemoform CH-Granules work quickly against bacteria, algae, viruses, and organic impurities, restoring water hygiene. They can be used for immediate shock chlorination after heavy use, algae infestation, or cloudiness, or for regular dosing for continuous chlorination. How to use it: Before adding, optimize the pH value (approx. 7.0–7.4). First, dissolve granules in a bucket of water. Distribute the solution around the edge of the pool while the circulation is running. Dosage (guidelines): Initial treatment / shock chlorination: ~ 70g per 10m³ water. Continuous chlorination: ~ 20–30g per 10m³ every 2–3 days.(depending on water condition and chlorine demand) Tips & Notes Only use Chemoclor CH-Granules after adjusting to the optimal pH value. Pour in the solution slowly and distribute it with circulation. Use biocidal products safely and read the label. Who is it suitable for? These chlorine granules are ideal for all swimming pools, hot tubs, or spas where strong, fast disinfection and reliable water treatment are desired – especially after intensive use or with cloudy or algae-laden water. Signal word: Warning Hazard statements:H302 Harmful if swallowed.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P261 Avoid breathing dust.P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

The Chemoform Bromine Tablets 20g are slow-dissolving bromine tablets used for the continuous disinfection of pool, whirlpool, or spa water. They offer a reliable alternative to traditional chlorine disinfection – especially popular when a chlorine-free, low-odor bathing experience is desired. Features & Benefits ✔ Slow-dissolving – even release of the active ingredient over several days without major fluctuations in the water. ✔ pH-neutral action – disinfection remains stable even with slightly deviating pH values. ✔ Odorless and skin-friendly – no typical chlorine odor, gentle on skin and eyes. ✔ Effective against microorganisms, bacteria, and organic impurities. ✔ Especially suitable for whirlpools and spa use, but also for pools of all sizes. Bromine is chemically a halogen like chlorine, but often offers greater pH tolerance and more pleasant water care – especially when bathing at higher temperatures frequently. Application & Dosage Measure pH value and ideally adjust to 7.0 – 7.6. Place tablets in a dosing float, bromine dispenser, or skimmer – do not throw directly into the pool (residues/discoloration possible). For continuous chlorination, re-dose approximately 2–4 tablets per 10 m³ of water every 2–4 days, depending on usage and water load. For new fills, use about 6 tablets per 10 m³ of water. 🧠 Why use Bromine? Bromine works as powerfully as chlorine, but is odorless and has higher effectiveness even at higher pH values – which makes it particularly interesting for whirlpools, spas, or heated pools. Its slow and stable release simplifies maintenance and ensures a comfortable bathing experience. ✅ Conclusion The Chemoform Bromine Tablets 20g are an easy, reliable, and skin-friendly solution for the continuous care of pool and whirlpool water without the typical chlorine odor. Their slow release of active ingredient ensures stable disinfection, less re-dosing, and pleasant bathing enjoyment – ideal for regular seasonal maintenance. Signal word: Danger Hazard statements:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.H400 Very toxic to aquatic life. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P280 Wear protective gloves / eye protection.P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

Chemoform Cleaner A Gel is a highly effective cleaning and care gel specially developed for removing dirt from pool edges, waterlines and pool surfaces. The viscous gel adheres particularly well to vertical surfaces, thoroughly dissolves limescale residues, grease, dirt and deposits and is easy to remove – for visually clean and well-maintained pool surfaces. Properties ✔ Gel formula – adheres well to walls and waterlines ✔ Dissolves limescale residues, water stains, dirt and grease ✔ Gentle on materials, does not attack pool surfaces ✔ Especially for pool edges, waterlines, inlet nozzles and steps ✔ Ideal for pools, hot tubs, spas & water basins Chemoform Flisan Gel is designed for targeted application where other cleaners do not adhere well, ensuring a visibly clean waterline and pool surface. Application Preparation: Dry or rinse the pool edge or dirty surface Application: Apply Flisan Gel evenly to dirty areas Leave to act: Leave to act briefly (depending on the degree of soiling) Wipe/rinse off: Wipe with a damp cloth or sponge Rinse: Rinse thoroughly with clear water 💡 Tip: For heavier deposits, repeat the application or leave the product to act for a little longer. Advantages at a glance Also removes stubborn limescale and water stains Ideal for hard-to-reach or vertical surfaces Protects pool materials – no material damage Promotes visually clean waterlines and pool edges Conclusion Chemoform Flisan Gel Edge Cleaner is a specialized care product for targeted cleaning of waterlines and pool edges in pools and hot tubs. Thanks to its adhesive gel formula, it removes dirt particularly efficiently – for visibly cleaner, well-maintained and limescale-free pool surfaces. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety precautions P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

Chemoform Winterfit is a phosphate- and chlorine-free liquid winterizing agent, specially developed to prevent limescale and algae deposits during the winter months. Its pH-neutral and low-foaming formula ensures that your pool water remains clean during the off-season, making spring cleaning significantly easier. Properties Liquid concentrate for winterizing pools and swimming basins Phosphate-free and chlorine-free – compatible with technology and water quality pH-neutral and low-foaming – no unpleasant odor Protects against algae growth and limescale deposits during the winter break Supports easier water treatment in spring Application & Dosage Lower water level: Lower the water level by approx. 20 cm below the inlet nozzles. Dilute: Dilute the required amount of Winterfit with 10 times its volume of water. Add: Slowly pour into the water along the edge of the pool. Dosing recommendation: Up to approx. 20 °dH: approx. 300 ml per 10 m³ water From approx. 20 °dH: approx. 600 ml per 10 m³ water 💡 Tip: In mild winters, re-dosing may be advisable to extend protection.  Conclusion Chemoform Winterfit liquid is the ideal winterizing agent for your pool, preventing limescale and algae formation during non-use and significantly facilitating water treatment in spring. It stylishly combines gentle care with effective prevention for clearer, well-maintained water after the winter break. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety instructions P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

The Chemoform Roller Shutter Cleaner is a specially developed liquid cleaner for thorough and gentle cleaning of pool roller shutter covers, slats, and plastic profiles. It reliably removes dirt, grease, limescale residues, and environmental pollution without damaging sensitive surfaces. Ideal for roller shutter systems made of plastic, aluminum, or coated material – especially for outdoor installations that are soiled by weathering, moisture, or water stains. Features ✔ Liquid cleaner for roller shutter and slat surfaces ✔ Removes dirt, grease, limescale, and water stains ✔ Gentle on plastic, aluminum, painted surfaces ✔ Easy and quick application ✔ Suitable for pool, whirlpool, and patio covers Application Dilute product: Dilute in water depending on the degree of soiling (e.g., 1:10 to 1:30) Apply: Apply evenly with a sponge, cloth, or spray device Allow to work: Let it work briefly, but do not let it dry Wipe & Rinse: Loosen dirt and rinse with clear water Dry: Rub dry with a clean cloth for streak-free shine 💡 Tip: Warm water can enhance the cleaning effect. Advantages at a Glance Ensures clean, well-maintained roller shutter surfaces Also removes stubborn environmental pollution Protects sensitive materials Practical for regular care and maintenance 📌 Conclusion The Chemoform Roller Shutter Cleaner is an effective yet gentle cleaning agent for roller shutter and slatted covers around the pool and patio. It reliably removes dirt, limescale, and water stains and ensures visually appealing, well-maintained surfaces – ideal for regular use. Signal word: DANGER Use biocidal products with care. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Precautionary statements P - phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform pH-Plus Granulate is a fast-dissolving pH regulator for increasing the pH value in pool and hot tub water. It ensures that the water remains in the optimal range and creates the ideal basis for effective disinfection and comfortable bathing. Properties ✔ Granulate for increasing the pH value ✔ Quickly and residue-free soluble ✔ Chloride-free and non-corrosive ✔ Suitable for pools, hot tubs and swimming pools ✔ Ideal for manual dosing in private areas Effect & Benefits A low pH value leads to: Corrosion of pool equipment Irritation of skin and eyes reduced disinfection efficacy Chemoform pH-Plus Granulate precisely raises the pH value into the ideal range of approx. 7.0 – 7.4, thereby stabilizing water quality and optimizing the effectiveness of chlorine or active oxygen. Application & Dosage Dosage: approx. 75 – 100 g per 10 m³ of water increase the pH value by about 0.1 – 0.2 Always pre-dissolve granulate in a bucket of water Then add evenly along the edge of the pool Regularly check the pH value and re-dose if necessary 💡 Tip: The required amount depends on the water hardness – hard water requires more, soft water less granulate. Advantages at a glance Stabilizes water balance Improves disinfection performance Protects pool equipment from corrosion Easy to use For permanently clear and pleasant water Note Check pH value at least 1-2 times per week Use product with caution (irritating to eyes) Conclusion The Chemoform pH-Plus Granulate is an indispensable basic product for pool care. It ensures the optimal pH value, protects the equipment and guarantees effective water disinfection – for permanently clean and pleasant bathing pleasure. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Precautionary statements P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

The Oxichlor shock granular is a highly effective pool and hot tub granular based on a combination of chlorine and active oxygen, specifically developed for shock chlorination (superchlorination / high chlorination) and rapid disinfection. The combination of chlorine and oxygen ensures extremely fast oxidation of organic contaminants in the water, quickly restoring turbid or "turned" water to crystal clarity. Features Effective Shock Chlorination: Ideal for season start, after heavy use, or with cloudy water. Chlorine-Active Oxygen Combination: Acts faster than conventional chlorine granulars. Quick and Residue-Free Dissolution: Spreads rapidly in water without leaving residues. pH-Neutral Action: Barely affects the pH value if the water is correctly adjusted beforehand (approx. 7.0 – 7.4). For All Pool Types: Suitable for pools, hot tubs, and spas of any size. Effect & Benefits Oxichlor shock granular uses its strong oxidizing power to rapidly break down organic impurities, microbes, and stabilizer residues, leading to significantly clearer water within a few hours – often without long waits for high chlorine levels to dissipate. Application & Dosage Adjust pH value: Before adding, adjust the pH value to approx. 7.0 – 7.4 for optimal effect. Pre-dissolve before adding: First dissolve the granulars in a bucket of water. Shock chlorination: Dose approx. 150 – 200 g per 10 m³ of water along the pool edge while the circulation is running. After-treatment: For regular water care, suitable continuous chlorination can also be used. Safety Instructions Do not mix with other chemicals – violent reactions possible. Use protective gloves, safety goggles, and adequate ventilation. Do not allow to enter the environment. Conclusion The Oxichlor shock granular is a powerful solution for rapid and efficient shock chlorination of pool and hot tub water. The combination of chlorine and active oxygen quickly eliminates impurities, ensures clear water, and is particularly suitable for starting the season, heavily used pools, or water problems requiring intensive cleaning. Signal word: Danger Hazard statements:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust.P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

Chemoform Metall‑Ex is a special liquid metal binder and metal remover for pools and hot tubs that binds and removes metal ions and mineral deposits from the water – for clearer, well-maintained water without unsightly discoloration. It is particularly useful when filling with well water or mineral-rich water or when metal deposits have formed on the pool bottom and walls. Properties Liquid special agent for the removal of metal ions such as iron, copper, silver, and calcium in water Binds and dissolves metal and lime deposits on pool walls and bottom Prevents water discoloration that can occur due to oxidation of metal ions Lowers the total hardness (calcium hardness) of the water Suitable for pools, hot tubs, and all common types of basins Application & Dosage Check pH value: Before application, the pH value of the water must be adjusted to above 7.5. Dosage: Add approx. 0.3 – 0.6 liters of Metall‑Ex per 10 m³ of water evenly to the water while the filter system is running. Filter running time: Let the filter pump run for at least 48 hours and then backwash the filter. pH control: After treatment, adjust the pH value to 7.0 – 7.6. Tip: Metall-Ex can also be applied directly to dry deposits (e.g., in an empty pool) and allowed to work with a damp cloth before rinsing with water. Advantages at a glance Effective metal remover for brown or green water discolorations Improves water quality and appearance Protects technology and surfaces from deposit damage Conclusion Chemoform Metall‑Ex is the perfect solution if your pool or hot tub water is cloudy, discolored, or dirty due to metal ions. It efficiently binds and removes metal ions as well as mineral deposits, ensuring clearer, well-maintained water and clean pool walls – without emptying the pool. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Precautionary statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container according to local / regional / national / international regulations.

Read more less

Chemoform Flockfix is a highly effective liquid flocculant for removing even the finest suspended particles and turbidity from pool water. It ensures that even the smallest particles are bound and removed by the filter system – for visibly clearer and hygienic water. Properties ✔ Liquid flocculant for turbidity removal ✔ Binds the finest suspended particles and makes them filterable ✔ Rapid flocculation for effective cleaning ✔ Effective in a wide pH range (also pH-neutral) ✔ Significantly improves filter performance ✔ Ideal for pools with sand filter systems Effect & Benefits Chemoform Flockfix ensures that: the finest dirt particles and turbid substances are bound these are combined into larger flakes the filter system can efficiently remove the particles The result is crystal-clear water and noticeably improved water quality. In addition, nutrients are reduced, which indirectly inhibits algae growth. Application & Dosing Shock application: approx. 50 – 100 ml per 10 m³ of water Add directly to the skimmer while the filter system is running After 2-3 days, backwash the filter 💡 Alternative application:A sponge can be soaked in Flockfix and placed in the skimmer – for continuous flocculation. 📌 Optimal pH value: 7.0 – 7.6 Notes Only suitable for sand filters, not for cartridge filters Do not mix with other chemicals Regularly check water values Advantages at a glance Fast removal of turbid water Crystal-clear appearance of the pool water Supports disinfection Simple and flexible application Ideal for regular pool maintenance Conclusion Chemoform Flockfix is an indispensable product for pool maintenance when it comes to crystal-clear water. It improves filter performance, removes even the finest suspended particles, and ensures visibly better water quality – fast, effective, and easy to use. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Precautionary statements P - phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

Chemoform Liquid Filter Cleaner is a specialized cleaning agent for the thorough and reliable cleaning of pool and hot tub filters. With its powerful active formula, it removes oils, greases, organic impurities, and limescale residues that may have accumulated in the filter and reduced its performance. Features ✔ Liquid filter cleaner – easy to dose ✔ Dissolves stubborn deposits in the filter system ✔ Removes oils, greases, organic residues & limescale ✔ Suitable for sand filter systems and other filter types ✔ Improves filter flow and water quality ✔ Compatible with common pool disinfection systems Regular use can significantly increase the efficiency of the filter system and reduce water and chemical consumption. Effect & Benefits Chemoform liquid filter cleaner ensures that: the filter gets free pores again the water flow is improved the filter performance increases again deposits of oils, limescale, and organic matter are dissolved This prevents common problems such as high pressure in the filter system, cloudy water, or reduced water circulation. Application & Dosage Switch off filter Dilute recommended amount of filter cleaner with water Pour solution slowly over skimmer or directly into the filter bed Let the filter system run in stand-by for approx. 12 – 24 hours Then backwash thoroughly and operate the filter normally again 💡 Tip: For very heavy soiling, pre- and post-cleaning is recommended. Benefits at a glance Optimizes filter performance Extends the lifespan of filter media Supports clear water quality Easy dilution and application Conclusion Chemoform liquid filter cleaner is a powerful care product for any pool or hot tub filter system. It removes even stubborn dirt, improves flow, and significantly contributes to clearer, more hygienic water. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

The Chemoform Stainless Steel Cleaner is a specially developed care product for thorough and material-friendly cleaning of stainless steel surfaces around the pool, hot tub, and wellness area. It reliably removes fingerprints, water stains, limescale residues, and light impurities without damaging the surface. Perfectly suited for all stainless steel elements such as stairs, handrails, cladding, or fittings – especially in humid environments where water stains and dirt quickly become visible. Properties ✔ Professional stainless steel cleaner for shiny surfaces ✔ Removes stains, streaks, limescale, and water residues ✔ Material-friendly, does not damage stainless steel ✔ Simple, quick application ✔ Suitable for pool surrounds, hot tub accessories, stairs, railings Application Apply stainless steel cleaner to a soft cloth or sponge Rub evenly over the surface Allow to act briefly Polish with a clean cloth or rinse with water Wipe the surface dry for a brilliant shine 💡 Tip: For heavier soiling, repeat the process if necessary. Advantages at a glance Visibly clean and brilliant stainless steel surfaces Removes stubborn limescale and water stains Protects stainless steel – no aggressive chemicals Suitable for indoor and outdoor surfaces Conclusion The Chemoform Stainless Steel Cleaner is the ideal solution for anyone who desires shiny, clean stainless steel surfaces around the pool and hot tub. It ensures excellent results with minimal effort – quick, gentle, and effective. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Precautionary statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform Compactal liquid is a highly effective, acidic basic cleaner for thorough cleaning of pool basins, walls, and waterlines. It reliably removes limescale, rust, algae, and mineral deposits and ensures a clean and well-maintained pool surface. Features ✔ Liquid, acidic intensive cleaner for pools ✔ Removes limescale, lime soap, rust, and deposits ✔ Effective against algae and stubborn dirt ✔ Suitable for pool walls, floor, and waterline ✔ Material-friendly when used correctly ✔ Very economical – can be diluted depending on the degree of soiling The product is specially developed for the basic cleaning of swimming pools and effectively dissolves even heavy encrustations. Effect & Benefits Chemoform Compactal liquid ensures: Removal of limescale and metal deposits Elimination of rust stains and discoloration Dissolution of stubborn dirt and biofilm Clean pool walls and a clear waterline Its strong cleaning power significantly facilitates spring cleaning and lays the foundation for optimal water care. Application Partially or completely empty the pool (depending on application) Dilute product 1:3 to 1:10 with water depending on soiling Apply to the surface with a sponge or brush Leave to act for 5–10 minutes Rinse thoroughly with water Repeat application for stubborn dirt. Advantages at a glance Removes heavy deposits and encrustations Ideal for spring and basic cleaning Very economical and efficient Suitable for many pool materials Ensures optically clean and hygienic surfaces Notes Not suitable for acid-sensitive materials (e.g. marble, enamel) Avoid contact with pool water if possible Protective clothing (gloves/goggles) recommended Do not mix product with other chemicals Conclusion The Chemoform Compactal liquid is a powerful cleaner for thorough pool care. It reliably removes limescale, rust, and deposits and provides a perfect basis for clear, hygienic water – ideal for the start of the season and intensive cleaning. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety precautions P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

The Chemoform Chemoclor T-Tablets 20 g are slow-dissolving chlorine tablets for the continuous disinfection of your pool or hot tub. With a high active chlorine content and stable, organic chlorine compound, they ensure lasting water hygiene by reliably acting against bacteria, germs, and organic impurities. Features at a Glance ✔ 20 g tablets – perfectly portioned for easy dosing ✔ Slow dissolving – even release of chlorine over days ✔ High chlorine content – ensures stable long-term chlorination ✔ Suitable for pools & hot tubs of any size ✔ Compatible with skimmer or dosing float Thanks to their slow solubility, the active ingredients are evenly distributed in the water, ensuring a constant chlorine effect over several days. This makes them the optimal solution for regular water care during the season. Effect & Area of Use The Chemoclor T-Tablets reliably act against: Bacteria and microorganisms Organic loads Turbidity and odor formation They are suitable for both long-term chlorination and support after shock chlorination when the water has been heavily used. For best results, the pH value of the water should be between 7.0 and 7.4 before adding. Application & Dosing Measure and adjust pH value (ideally 7.0 – 7.4). Dose tablets via a skimmer or dosing float. Add 1-2 tablets per 10 m³ of water every 4-6 days, depending on water demand. For shock chlorination, use additional fast-dissolving chlorine products if necessary. Advantages at a Glance Simple, hygienic chlorine supply without constant re-dosing Stabilized formula for long-lasting effect Gentle water care without strong chlorine odors Ideal for private pools and hot tubs Conclusion The Chemoform Chemoclor T-Tablets 20 g are an efficient, reliable, and user-friendly solution for continuous chlorination in pool or hot tub water. They ensure visibly clear, hygienically clean water over several days – ideal for regular maintenance during the bathing season. Signal word: WarningHazard statements:H302 Harmful if swallowed.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P261 Avoid breathing dust.P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The T-Large Tablets 200g (e.g., Chemoform Chemoclor T-Large Tablets) are slow-dissolving chlorine tablets for continuous disinfection of your pool or hot tub water. They release chlorine evenly over several days, ensuring long-lasting and stable water maintenance – ideal for the entire swimming season. Properties Slow-dissolving 200g chlorine tablets – release chlorine over a longer period and reduce the frequency of re-dosing. Organic chlorine compound with active chlorine – effectively acts against bacteria, germs, and algae. Suitable for continuous chlorination and for basic disinfection of your pool or hot tub. Works regardless of water hardness. Application & Dosing Continuous chlorination: Add approx. 1 tablet per 25–50m³ of water every 5–10 days to a dosing float or skimmer. Check pH value: Ensure the pH value is between approx. 7.0 and 7.6 for optimal chlorine effectiveness. Do not throw tablets directly into the water; instead, place them in a float or dispenser. Advantages at a glance ✔ Constant chlorine supply over a long period ✔ Reduces effort and maintenance frequency ✔ Supports clear, hygienic water ✔ Effective against algae and microorganisms Conclusion The T-Large Tablets 200g are a reliable and user-friendly solution for continuous chlorination of pool or hot tub water. Due to their slow dissolution and simple application, they facilitate regular water maintenance and ensure stable, hygienically clean water values throughout the swimming season. Signal word: Warning Hazard statements:H302 Harmful if swallowed.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects. Safety instructions:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P261 Avoid breathing dust.P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

The Chemoform Chemoclor Stabilizer is a specially developed chlorine stabilizer granulate that slows down the too rapid breakdown of free chlorine in pool water, for example due to strong sunlight or heat. This means the disinfectant effect of the chlorine lasts longer – which translates to less chemical redosing and more stable water values. Properties ✔ Stabilizes the chlorine level in the water – prevents too rapid chlorine consumption due to UV radiation and heat. ✔ Slow-dissolving granulate that disperses evenly in the water. ✔ pH-neutral action – does not directly change the pH value. ✔ Works regardless of water hardness. ✔ Especially useful when using chlorine disinfectants without an integrated stabilizer. Application & Dosing Adjust pH value: Before adding, adjust the pH value to approx. 7.0 – 7.6. After refilling, slowly add the granulate to the skimmer while the filter system is running. Dosing: New filling: approx. 250 – 400 g per 10 m³ of water. Redosing: approx. 20 – 25 g per 1 m³ of fresh water as needed. Keep the circulation system running after adding to ensure the product is completely distributed. 💡 Tip: Do not pour the granulate directly against the pool wall, as this may temporarily cause slight cloudiness. Advantages at a glance Longer lasting effect of free chlorine in the water Less chemical redosing necessary More stable disinfection effect in sunlight Supports permanently hygienically clear water Conclusion The Chemoform Stabilizer 1 kg is a clever addition to the chlorine disinfection of your pool or hot tub. It helps to reduce chlorine consumption, ensures stable chlorine levels over a longer period, and makes water care more efficient and economical – especially with frequent bathing or heavy environmental loads.

Read more less

The Chemoform Chemoclor Multi-Tablets 200g are powerful, slow-dissolving multi-function tablets with active chlorine, combining continuous chlorination, algae control, and flocculation in one product. Thanks to their 3-in-1 formula, they provide comprehensive water treatment, ensuring clean, hygienically clear water with minimal effort. Features at a Glance ✔ 3-in-1 effect: disinfection, algae prevention, and flocculation in one product ✔ Slow-dissolving – consistent release over several days ✔ Contains active chlorine for reliable microbial killing ✔ Ideal for continuous chlorination throughout the season ✔ Particularly suitable for medium to large pools and whirlpool water care Effect & Application The tablets reliably combat bacteria, germs, and organic impurities, prevent algae growth, and help bind suspended solids so they can be better captured by the filter system. For application, it is best to place the tablet in a dosing float or skimmer, never directly into the pool or whirlpool. The ideal pH value should be between approximately 7.0 – 7.4. Recommended Dosage: For continuous chlorination: approximately 1 tablet per 20–25 m³ of water every 7–10 days. Regularly check pH and chlorine levels and adjust as needed. Advantages for Water Care Saves time and maintenance effort with a simple, combined solution Reduces the need for additional flocculants or algaecides Supports a stable, clear water appearance over a longer period Particularly useful for regular pool and whirlpool use Conclusion:The Chemoform Chemoclor Multi-Tablets 200g are a practical and efficient 3-in-1 solution for the long-term care of pool and whirlpool water – for clear, hygienic, and worry-free water quality with minimal maintenance. Signal word: Warning Hazard statements:H302 Harmful if swallowed.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P261 Avoid breathing dust.P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

Chemoform Calzestab Eisenex liquid is a highly effective special agent for the prevention and removal of metallic impurities and limescale deposits in pool and hot tub water. It binds metal ions such as iron, copper, and manganese, as well as micro-fine calcium particles, before they lead to unsightly discoloration, limescale stains, or cloudy water. This ensures clearer, well-maintained water and protects equipment and pool surfaces. Features at a glance ✔ Liquid metal & scale inhibitor ✔ Binds iron, copper, manganese & other metal ions ✔ Prevents discoloration (brown/red/green) of the water ✔ Reduces limescale and rust deposits on walls & in equipment ✔ pH-neutral and compatible with common disinfection methods ✔ Suitable for pools, hot tubs & spas This product supports stable water and filter quality and can be used as preparation when filling and for ongoing maintenance. Effect & Benefits Chemoform Calzestab Eisenex liquid works by chemically binding free metal ions in the water and converting them into soluble, non-harmful compounds. This prevents typical problems such as: Metallic discolorations Brown, red or green water discoloration Limescale and rust spots on pool walls Poor filter operation and cloudiness — without emptying the pool. At the same time, it contributes to water treatment throughout the entire season. Application & Dosage Check and adjust pH value: Optimal range 7.0 – 7.4 Dosage: Approx. 100 – 200 ml per 10 m³ of water Pour slowly and evenly along the pool edge while the circulation system is running Leave the filter system running for at least 24 hours Then backwash or clean the filter If refilling or with more severe metal/limescale problems, the treatment can be repeated. Benefits at a glance Ensures optically clearer, color-stable water Protects filters, equipment, and pool surfaces from deposits Compatible with chlorine, bromine, or active oxygen disinfection Easy to use even during ongoing operation Conclusion Chemoform Calzestab Eisenex liquid is an excellent solution for pool and hot tub owners who want to prevent or fix metal and limescale problems. It ensures nicer, clearer water, fewer deposits, and optimized water care throughout the entire season – without aggressive chemicals. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety instructions P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform Aquablanc O2 Granules are a highly effective, chlorine-free disinfectant based on active oxygen for the care of pool and hot tub water. It ensures crystal-clear, hygienically clean water – completely without the typical chlorine odor and without irritation to skin and eyes. Properties ✔ Chlorine-free disinfection with active oxygen ✔ Odorless and skin-friendly – ideal for sensitive bathers ✔ Quickly soluble without residue ✔ Suitable for pools, hot tubs, and spas ✔ Can be combined with an activator (e.g., Aquablanc A) for maximum effect Effect & Benefits Aquablanc O2 Granules increase the active oxygen content in the water and reliably combat: Bacteria Germs Organic contaminants Compared to chlorine, it offers gentle water care that is particularly suitable for allergy sufferers or sensitive skin. At the same time, the water remains clear, fresh, and pleasant. Application & Dosage Initial dosage: approx. 50 g per 1,000 liters of water Follow-up dosage: approx. 20–30 g per 1,000 liters weekly Ideal active oxygen value: 5 – 8 mg/l Optimal pH value: 7.0 – 7.4 The granules can be added directly to the water or dissolved beforehand. For optimal results, it is recommended to use in combination with an activator/algicide. Notes Slightly pH-lowering, therefore regularly check pH value Use biocidal products carefully Avoid contact with skin and eyes (signal word: Danger) Conclusion The Chemoform Aquablanc O2 Granules are the perfect choice for anyone looking for chlorine-free, gentle yet effective water disinfection. It combines strong cleaning power with maximum bathing comfort – ideal for modern pool and hot tub care. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety statements P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

Effective protection against algae, bacteria and fungi Chemoform Alba Super K is a gentle yet highly effective algaecide for water treatment in pools, hot tubs and spas. The liquid, absolutely foam-free formula prevents algae growth, bacterial contamination and fungi and ensures clear, hygienically clean water. Its pH-neutral composition means it is compatible with all common disinfectants such as chlorine, bromine or active oxygen and can reduce the need for these products – but does not completely replace them. Properties Liquid, foam-free algaecide for algae and microorganism control pH-neutral & odorless – pleasant for bathers Compatible with chlorine, active oxygen or bromine disinfection Suitable for pools, hot tubs & counter-current systems Can be used with all filter systems Ideal for algae prophylaxis and re-dosing Do not use in fish ponds Application & Dosage 🔹 Initial dosage: 100 ml per 10 m³ pool or hot tub water🔹 Re-dosing: 200 ml per 10 m³ every 14 days🔹 Shock treatment for algae infestation: additionally use 100 ml per 10 m³ For dosing, it is recommended to first dilute the product in a bucket of water and then slowly add it to the water along the edge of the pool. The ideal pH range for optimal effectiveness is 7.0–7.6. Advantages at a glance Effective algae prevention and control Does not foam – ideal for hot tubs & counter-current systems Neutral pH value and compatible with other care products Supports disinfection and can reduce chemical demand Simple, flexible dosing depending on water contamination Conclusion Chemoform Alba Super K is a powerful, liquid algaecide that reliably prevents and controls algae, bacteria and fungi in pool or hot tub water. With its pH-neutral, foam-free formula, it is particularly suitable for hot tubs, pools with counter-current systems or warm water – for crystal-clear and hygienic bathing pleasure. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemochlor T-Granulate 65 is a high-quality, fast-dissolving chlorine granulate for the disinfection of swimming pool, whirlpool, and spa water. With an active chlorine content of around 65%, it effectively combats bacteria, algae, fungi, and organic impurities, ensuring hygienically clean water in your pool. Features at a Glance ✔ Fast, residue-free dissolving in water ✔ Organic chlorine compound with approx. 65% active chlorine ✔ Suitable for shock and continuous chlorination ✔ Can be used independently of water hardness ✔ Supports clear, hygienic pool and whirlpool water Effect & Benefits Chemochlor granulate increases the chlorine content in the water to quickly and reliably eliminate harmful germs. It is suitable for both new fillings and season start treatments as well as for regular continuous chlorination during bathing operations. The stabilized chlorine form is resistant even at higher water temperatures and ensures consistent disinfection performance. Dosing Recommendation Season Start / Shock Chlorination: approx. 50–90g per 10 m³ water Continuous Chlorination during operation: approx. 25g per 10 m³ water every 3 days With each addition, ensure that the circulation system runs for several hours so that the chlorine is fully distributed. Tip: Always check the pH value before adding and, if necessary, adjust it to 7.0–7.6 to optimize the disinfection effect. Safety & Instructions Chlorine granulate is a strong oxidizing agent and is intended only for pool and whirlpool care. In case of contact with skin or eyes, take appropriate protective measures. Use biocidal products carefully and always read the label and safety data sheet. Conclusion The Chemochlor T-Granulate 65 is an effective solution for disinfecting pool and whirlpool water. It offers a strong chlorine effect, is fast-dissolving and can be used for both initial application and regular chlorine care – for clearly visible, hygienically clean water throughout the bathing season. Signal word: Warning Hazard statements:H302 Harmful if swallowed.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P261 Avoid breathing dust.P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

Chemoform Anti-Foam is a powerful, liquid defoamer that quickly and reliably eliminates bothersome foam in pool and whirlpool water. Thanks to its specially formulated composition, it effectively tackles even stubborn foaming – ideal for frequent swimming, or cosmetic and care product residues in the water. Properties ✔ Liquid anti-foam remover ✔ Works quickly on visible foam ✔ Does not affect water treatment ✔ Gentle on filters and equipment ✔ Compatible with all common disinfection methods Foam can be caused by soap and care product residues, organic substances, or warm water with low surface tension. Chemoform Anti-Foam effectively tackles these issues without negative effects on your water treatment program. Effect & Benefits Reduces foam almost immediately Works reliably even with heavy foaming Improves visual water quality Protects filter systems and ensures efficient filtration Easy dosing and application Application & Dosing Observation: Check for foam on the water surface Addition: Add a small amount of anti-foam directly to the pool water Circulation: Run the circulation pump briefly Check: Redose if necessary – in small increments 💡 Tip: For heavy foam, a slightly higher dosage may be necessary, but always dose carefully to avoid product waste. Notes Anti-foam always works specifically on visible foam – it does not replace disinfection or water treatment For recurring foam, additional optimization of water treatment may be beneficial (pH value, disinfection, algaecide) Conclusion Chemoform Anti-Foam is an effective aid for all pool and whirlpool owners who want to get foam formation under control quickly and effectively. Its gentle, straightforward application makes it an indispensable part of any complete water treatment regimen. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Precautionary statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less