Einwintern

The Chemoform pH-Minus Granules are an effective pH regulator for lowering an excessively high pH value in pool and hot tub water. They ensure that the water remains within the optimal range and create the basis for effective disinfection and clear, pleasant bathing water. Properties ✔ Granules for lowering the pH value ✔ Fast and residue-free dissolving ✔ Suitable for pools, hot tubs and swimming pools ✔ Prevents limescale deposits and incrustations ✔ Supports the optimal effect of disinfectants An excessively high pH value often leads to cloudy water, limescale deposits, and reduced disinfection performance. The product brings the value back to the ideal range of approx. 7.0 – 7.4. Effect & Benefits By targeted lowering of the pH value: the effectiveness of chlorine or active oxygen improves limescale deposits are prevented the water remains clear and hygienic skin and eye irritations are reduced Application & Dosage Dosage: approx. 150 g per 10 m³ water lowers the pH value by about 0.2 Always pre-dissolve granules in a bucket of water Add solution evenly to the water with the circulation running Apply in several small steps with intermediate measurement 💡 Note: The required amount depends on the water hardness – hard water requires more product. Advantages at a Glance Sustainably stabilizes water quality Protects pool equipment from limescale and deposits Improves disinfection performance Simple and safe application For consistently clear, well-maintained water Notes Check pH value regularly (1–2 times per week) Do not apply product directly to sensitive materials Do not mix with other chemicals Conclusion The Chemoform pH-Minus Granules are an indispensable basic product for pool care. They ensure the correct water balance, protect equipment and surfaces, and enable effective disinfection – for clean, clear and pleasant water. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Delphin 3-in-1 Test Strips are the ideal solution for quick and easy water quality control in your hot tub or pool. With just one test strip, you can measure the most important water values and keep your water care under control at all times. Reliable 3-in-1 Water Analysis The test strips allow simultaneous measurement of: ✔ pH value ✔ free chlorine or bromine ✔ total alkalinity This allows you to quickly determine if your water is optimally adjusted and make targeted adjustments if necessary. Regular checks are crucial for hygienically perfect bathing pleasure. Features at a glance ✔ Fast results in seconds ✔ Easy to use without a measuring device ✔ Ideal for hot tubs, spas, and pools ✔ 50 test strips per container ✔ Compact and perfect for regular checks Application Hold the test strip in the water for approx. 5 seconds Wait briefly (approx. 10 seconds) Compare the color with the scale on the packaging This way, you get a reliable assessment of your water values immediately. For safe and clear hot tub water With the Delphin Spa Test Strips, you can check your water quality quickly and easily. They are an indispensable tool for regular hot tub care and help to permanently ensure optimal water values and hygienic conditions.

Read more less

Labulit Pool 7-in-1 Test Strips offer a user-friendly solution for water analysis in swimming pools and hot tubs. Measurement of: pH Free Chlorine Total Chlorine Bromine Cyanuric Acid Alkalinity (TA) Total Hardness fH Contents: 50 Test Strips Application The test strips are easy to use. Dip the test strip into the water and compare the colors with the enclosed scale to determine the values. The recommended daily dose must not be exceeded.

Read more less

Chemoform Winterfit is a phosphate- and chlorine-free liquid winterizing agent, specially developed to prevent limescale and algae deposits during the winter months. Its pH-neutral and low-foaming formula ensures that your pool water remains clean during the off-season, making spring cleaning significantly easier. Properties Liquid concentrate for winterizing pools and swimming basins Phosphate-free and chlorine-free – compatible with technology and water quality pH-neutral and low-foaming – no unpleasant odor Protects against algae growth and limescale deposits during the winter break Supports easier water treatment in spring Application & Dosage Lower water level: Lower the water level by approx. 20 cm below the inlet nozzles. Dilute: Dilute the required amount of Winterfit with 10 times its volume of water. Add: Slowly pour into the water along the edge of the pool. Dosing recommendation: Up to approx. 20 °dH: approx. 300 ml per 10 m³ water From approx. 20 °dH: approx. 600 ml per 10 m³ water 💡 Tip: In mild winters, re-dosing may be advisable to extend protection.  Conclusion Chemoform Winterfit liquid is the ideal winterizing agent for your pool, preventing limescale and algae formation during non-use and significantly facilitating water treatment in spring. It stylishly combines gentle care with effective prevention for clearer, well-maintained water after the winter break. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety instructions P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

Chemoform Flockfix is a highly effective liquid flocculant for removing even the finest suspended particles and turbidity from pool water. It ensures that even the smallest particles are bound and removed by the filter system – for visibly clearer and hygienic water. Properties ✔ Liquid flocculant for turbidity removal ✔ Binds the finest suspended particles and makes them filterable ✔ Rapid flocculation for effective cleaning ✔ Effective in a wide pH range (also pH-neutral) ✔ Significantly improves filter performance ✔ Ideal for pools with sand filter systems Effect & Benefits Chemoform Flockfix ensures that: the finest dirt particles and turbid substances are bound these are combined into larger flakes the filter system can efficiently remove the particles The result is crystal-clear water and noticeably improved water quality. In addition, nutrients are reduced, which indirectly inhibits algae growth. Application & Dosing Shock application: approx. 50 – 100 ml per 10 m³ of water Add directly to the skimmer while the filter system is running After 2-3 days, backwash the filter 💡 Alternative application:A sponge can be soaked in Flockfix and placed in the skimmer – for continuous flocculation. 📌 Optimal pH value: 7.0 – 7.6 Notes Only suitable for sand filters, not for cartridge filters Do not mix with other chemicals Regularly check water values Advantages at a glance Fast removal of turbid water Crystal-clear appearance of the pool water Supports disinfection Simple and flexible application Ideal for regular pool maintenance Conclusion Chemoform Flockfix is an indispensable product for pool maintenance when it comes to crystal-clear water. It improves filter performance, removes even the finest suspended particles, and ensures visibly better water quality – fast, effective, and easy to use. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Precautionary statements P - phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

The Oxichlor shock granular is a highly effective pool and hot tub granular based on a combination of chlorine and active oxygen, specifically developed for shock chlorination (superchlorination / high chlorination) and rapid disinfection. The combination of chlorine and oxygen ensures extremely fast oxidation of organic contaminants in the water, quickly restoring turbid or "turned" water to crystal clarity. Features Effective Shock Chlorination: Ideal for season start, after heavy use, or with cloudy water. Chlorine-Active Oxygen Combination: Acts faster than conventional chlorine granulars. Quick and Residue-Free Dissolution: Spreads rapidly in water without leaving residues. pH-Neutral Action: Barely affects the pH value if the water is correctly adjusted beforehand (approx. 7.0 – 7.4). For All Pool Types: Suitable for pools, hot tubs, and spas of any size. Effect & Benefits Oxichlor shock granular uses its strong oxidizing power to rapidly break down organic impurities, microbes, and stabilizer residues, leading to significantly clearer water within a few hours – often without long waits for high chlorine levels to dissipate. Application & Dosage Adjust pH value: Before adding, adjust the pH value to approx. 7.0 – 7.4 for optimal effect. Pre-dissolve before adding: First dissolve the granulars in a bucket of water. Shock chlorination: Dose approx. 150 – 200 g per 10 m³ of water along the pool edge while the circulation is running. After-treatment: For regular water care, suitable continuous chlorination can also be used. Safety Instructions Do not mix with other chemicals – violent reactions possible. Use protective gloves, safety goggles, and adequate ventilation. Do not allow to enter the environment. Conclusion The Oxichlor shock granular is a powerful solution for rapid and efficient shock chlorination of pool and hot tub water. The combination of chlorine and active oxygen quickly eliminates impurities, ensures clear water, and is particularly suitable for starting the season, heavily used pools, or water problems requiring intensive cleaning. Signal word: Danger Hazard statements:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage. Precautionary statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust.P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

Effective protection against algae, bacteria and fungi Chemoform Alba Super K is a gentle yet highly effective algaecide for water treatment in pools, hot tubs and spas. The liquid, absolutely foam-free formula prevents algae growth, bacterial contamination and fungi and ensures clear, hygienically clean water. Its pH-neutral composition means it is compatible with all common disinfectants such as chlorine, bromine or active oxygen and can reduce the need for these products – but does not completely replace them. Properties Liquid, foam-free algaecide for algae and microorganism control pH-neutral & odorless – pleasant for bathers Compatible with chlorine, active oxygen or bromine disinfection Suitable for pools, hot tubs & counter-current systems Can be used with all filter systems Ideal for algae prophylaxis and re-dosing Do not use in fish ponds Application & Dosage 🔹 Initial dosage: 100 ml per 10 m³ pool or hot tub water🔹 Re-dosing: 200 ml per 10 m³ every 14 days🔹 Shock treatment for algae infestation: additionally use 100 ml per 10 m³ For dosing, it is recommended to first dilute the product in a bucket of water and then slowly add it to the water along the edge of the pool. The ideal pH range for optimal effectiveness is 7.0–7.6. Advantages at a glance Effective algae prevention and control Does not foam – ideal for hot tubs & counter-current systems Neutral pH value and compatible with other care products Supports disinfection and can reduce chemical demand Simple, flexible dosing depending on water contamination Conclusion Chemoform Alba Super K is a powerful, liquid algaecide that reliably prevents and controls algae, bacteria and fungi in pool or hot tub water. With its pH-neutral, foam-free formula, it is particularly suitable for hot tubs, pools with counter-current systems or warm water – for crystal-clear and hygienic bathing pleasure. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform Algen Ex liquid is a highly effective, chlorine-free algaecide for preventing and combating algae in pool and whirlpool water. It reliably ensures clear, hygienic water and sustainably prevents the re-formation of algae. Properties ✔ Liquid algaecide for algae prevention ✔ Chlorine-free, pH-neutral and odorless ✔ Low-foaming – also ideal for whirlpools ✔ Can be combined with all common water care products ✔ Suitable for pools, swimming pools and spas The product is particularly user-friendly and does not affect water quality or bathing comfort. Effect & Benefits Chemoform Algen Ex specifically targets: Algae formation Slime formation on walls and pipes Organic impurities It reliably prevents algae growth and supports disinfection, but does not replace chlorine or oxygen treatment; rather, it complements them optimally. Application & Dosage Initial dosage: approx. 100 ml per 10 m³ water Redosing: every 14 days, 100 ml per 10 m³ For algae infestation (shock treatment): approx. 250 ml per 10 m³ Always dilute the product beforehand and add it evenly along the pool edge into the water. 💡 Tip: Ideal pH value for optimal effect is 7.0 – 7.6. Notes Does not replace disinfection – use chlorine or active oxygen in addition Increase dosage in case of high load (heat, rain, many bathers) Use biocidal product with caution (signal word: Danger) Conclusion The Chemoform Algen Ex liquid is an indispensable product for preventive pool care. It effectively protects against algae growth, improves water quality, and ensures consistently clear and well-maintained pool water – ideal in combination with your regular disinfection. Signal word: DANGER Use biocidal products with caution. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety precautions P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container according to local / regional / national / international regulations.

Read more less

Chemoform Calzestab Eisenex liquid is a highly effective special agent for the prevention and removal of metallic impurities and limescale deposits in pool and hot tub water. It binds metal ions such as iron, copper, and manganese, as well as micro-fine calcium particles, before they lead to unsightly discoloration, limescale stains, or cloudy water. This ensures clearer, well-maintained water and protects equipment and pool surfaces. Features at a glance ✔ Liquid metal & scale inhibitor ✔ Binds iron, copper, manganese & other metal ions ✔ Prevents discoloration (brown/red/green) of the water ✔ Reduces limescale and rust deposits on walls & in equipment ✔ pH-neutral and compatible with common disinfection methods ✔ Suitable for pools, hot tubs & spas This product supports stable water and filter quality and can be used as preparation when filling and for ongoing maintenance. Effect & Benefits Chemoform Calzestab Eisenex liquid works by chemically binding free metal ions in the water and converting them into soluble, non-harmful compounds. This prevents typical problems such as: Metallic discolorations Brown, red or green water discoloration Limescale and rust spots on pool walls Poor filter operation and cloudiness — without emptying the pool. At the same time, it contributes to water treatment throughout the entire season. Application & Dosage Check and adjust pH value: Optimal range 7.0 – 7.4 Dosage: Approx. 100 – 200 ml per 10 m³ of water Pour slowly and evenly along the pool edge while the circulation system is running Leave the filter system running for at least 24 hours Then backwash or clean the filter If refilling or with more severe metal/limescale problems, the treatment can be repeated. Benefits at a glance Ensures optically clearer, color-stable water Protects filters, equipment, and pool surfaces from deposits Compatible with chlorine, bromine, or active oxygen disinfection Easy to use even during ongoing operation Conclusion Chemoform Calzestab Eisenex liquid is an excellent solution for pool and hot tub owners who want to prevent or fix metal and limescale problems. It ensures nicer, clearer water, fewer deposits, and optimized water care throughout the entire season – without aggressive chemicals. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety instructions P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container to local / regional / national / international regulations.

Read more less

The Chemoform Compactal liquid is a highly effective, acidic basic cleaner for thorough cleaning of pool basins, walls, and waterlines. It reliably removes limescale, rust, algae, and mineral deposits and ensures a clean and well-maintained pool surface. Features ✔ Liquid, acidic intensive cleaner for pools ✔ Removes limescale, lime soap, rust, and deposits ✔ Effective against algae and stubborn dirt ✔ Suitable for pool walls, floor, and waterline ✔ Material-friendly when used correctly ✔ Very economical – can be diluted depending on the degree of soiling The product is specially developed for the basic cleaning of swimming pools and effectively dissolves even heavy encrustations. Effect & Benefits Chemoform Compactal liquid ensures: Removal of limescale and metal deposits Elimination of rust stains and discoloration Dissolution of stubborn dirt and biofilm Clean pool walls and a clear waterline Its strong cleaning power significantly facilitates spring cleaning and lays the foundation for optimal water care. Application Partially or completely empty the pool (depending on application) Dilute product 1:3 to 1:10 with water depending on soiling Apply to the surface with a sponge or brush Leave to act for 5–10 minutes Rinse thoroughly with water Repeat application for stubborn dirt. Advantages at a glance Removes heavy deposits and encrustations Ideal for spring and basic cleaning Very economical and efficient Suitable for many pool materials Ensures optically clean and hygienic surfaces Notes Not suitable for acid-sensitive materials (e.g. marble, enamel) Avoid contact with pool water if possible Protective clothing (gloves/goggles) recommended Do not mix product with other chemicals Conclusion The Chemoform Compactal liquid is a powerful cleaner for thorough pool care. It reliably removes limescale, rust, and deposits and provides a perfect basis for clear, hygienic water – ideal for the start of the season and intensive cleaning. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety precautions P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less

Chemoform Liquid Filter Cleaner is a specialized cleaning agent for the thorough and reliable cleaning of pool and hot tub filters. With its powerful active formula, it removes oils, greases, organic impurities, and limescale residues that may have accumulated in the filter and reduced its performance. Features ✔ Liquid filter cleaner – easy to dose ✔ Dissolves stubborn deposits in the filter system ✔ Removes oils, greases, organic residues & limescale ✔ Suitable for sand filter systems and other filter types ✔ Improves filter flow and water quality ✔ Compatible with common pool disinfection systems Regular use can significantly increase the efficiency of the filter system and reduce water and chemical consumption. Effect & Benefits Chemoform liquid filter cleaner ensures that: the filter gets free pores again the water flow is improved the filter performance increases again deposits of oils, limescale, and organic matter are dissolved This prevents common problems such as high pressure in the filter system, cloudy water, or reduced water circulation. Application & Dosage Switch off filter Dilute recommended amount of filter cleaner with water Pour solution slowly over skimmer or directly into the filter bed Let the filter system run in stand-by for approx. 12 – 24 hours Then backwash thoroughly and operate the filter normally again 💡 Tip: For very heavy soiling, pre- and post-cleaning is recommended. Benefits at a glance Optimizes filter performance Extends the lifespan of filter media Supports clear water quality Easy dilution and application Conclusion Chemoform liquid filter cleaner is a powerful care product for any pool or hot tub filter system. It removes even stubborn dirt, improves flow, and significantly contributes to clearer, more hygienic water. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H - phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and eye damage.Safety statements P – phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local / regional / national / international regulations.

Read more less

The Chemoform pH-Plus Granulate is a fast-dissolving pH regulator for increasing the pH value in pool and hot tub water. It ensures that the water remains in the optimal range and creates the ideal basis for effective disinfection and comfortable bathing. Properties ✔ Granulate for increasing the pH value ✔ Quickly and residue-free soluble ✔ Chloride-free and non-corrosive ✔ Suitable for pools, hot tubs and swimming pools ✔ Ideal for manual dosing in private areas Effect & Benefits A low pH value leads to: Corrosion of pool equipment Irritation of skin and eyes reduced disinfection efficacy Chemoform pH-Plus Granulate precisely raises the pH value into the ideal range of approx. 7.0 – 7.4, thereby stabilizing water quality and optimizing the effectiveness of chlorine or active oxygen. Application & Dosage Dosage: approx. 75 – 100 g per 10 m³ of water increase the pH value by about 0.1 – 0.2 Always pre-dissolve granulate in a bucket of water Then add evenly along the edge of the pool Regularly check the pH value and re-dose if necessary 💡 Tip: The required amount depends on the water hardness – hard water requires more, soft water less granulate. Advantages at a glance Stabilizes water balance Improves disinfection performance Protects pool equipment from corrosion Easy to use For permanently clear and pleasant water Note Check pH value at least 1-2 times per week Use product with caution (irritating to eyes) Conclusion The Chemoform pH-Plus Granulate is an indispensable basic product for pool care. It ensures the optimal pH value, protects the equipment and guarantees effective water disinfection – for permanently clean and pleasant bathing pleasure. Signal word: DANGER Use biocidal products carefully. Always read the label and product information before use. Hazard statements H-phrases:H302 Harmful if swallowed.H314 Causes severe skin burns and serious eye damage.Precautionary statements P-phrases:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P260 Do not breathe dust/fume/gas/mist/vapours/spray.P303+361+353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P405 Store locked up.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Read more less